This low voltage led rgb tape light amplifier is the perfect tool for extending the length of your led tape light run. Simply take the end of your tape light run and wire in into the clearly labeled input wire slots. From there, connect a secondary low voltage transformer to the power port on the amplifier. Then, wire your new length of tape light into the outport wire slots labled on the transformer. That's it! Perfect for color changing modes, this amplifier will keep the color change mode that you set on your RGB controller consitent through the entire length of your tape light system. This amplifier will support up to 2 rolls of standard output LED RGB tape light(32ft), or 1 roll of high output LED RGB tape light (16ft). Additional lengths require additional amplifiers.
Voltage | 5V-12V |
Max Output Current | 4A Each Color (12A total) |
Working Temperature | -4°F; - 140°F |
Dimensions | 4 3/16" L x 2 9/16" W x 1" H |