| NEW IMPROVED DESIGN | HIGH OUTPUT | 32 FEET | 162 LUMENS PER FOOT | COOL WHITE OR WARM WHITE |
Get the LEDAQT32-55-30 kit while supplies last! Demand is high and supplies are limited!
32 feet! What Does it Mean for You? We are proud to offer 32 feet of tape light powered from one transformer. Tape light in its current design starts to lose voltage after 16 feet, therefore increasing tape light to 32 feet requires a complete redesign on how tape light is made.
Male / Female Connector in between the two rolls The LEDAQT32-55-30 has created a great and simple male/female plug at both end of the roll, enabling you to easily connect the rolls at the 16 feet mark to get to 32 feet with the same power source.
Easy Surface Mounting The LEDAQT32-55-30 flush mount kitchen light fixture has installed 3M double sided tape on this kit. It will make installation on clean surfaces painless, without tools or hardware.
It's Dimmable! Add the 75W dimmable transformer to your order and a compatible dimmable Lutron CL Digital Dimmer and your tape light will dim, it's that easy! (Note: 75W will allow for up to 32 feet connected while 150W will allow for 64 feet connected to the dimmer, that is 4 rolls! Note that no more than 32 feet can be connected on each run.)
No Wiring Required! Simply plug in the included LED 72W transformer and light up your world! All wiring jobs should be this easy.
On/Off Switch: The tape light customers demanded it, we did it! This optional on and off switch makes operating the tape light easy.
| Voltage | 12V DC |
| Material | Copper Board with Silicone Epoxy |
| Length | 32.8' |
| Power Draw | 2.2 Watts per Foot |
| Color Temperature | Warm White (3000K) / Cool White (5000K) |
| Type of LED & # of LED | SMD5050 & 30 per meter |
| Certifications | IP65 Rated against Dust Particles and Water |
