Marine Grade 316 Stainless Steel

Commercial Construction

ETL Approved

Pre-Wired w/ 252" of 16/3 Underwater Cable

Includes LED PAR36

Get the best of both worlds, maximum energy efficiency with commercial grade construction from the LED-LV308-SS316 underwater fountain light fixture. Included with the fixture is one of our 6w LED Chip on Board PAR36 bulbs (in your choice of warm white or cool white), which can generate the same light output as a traditional 35w incandescent light bulb. One of the most durable underwater fountain lights on the market, the LED-LV308-SS316 is crafted from Marine Grade 316 stainless steel for extended durability against sea water corrosion. Utilizing an adjustable style bulb holder, you can change the beam angle of your PAR36 to achieve lighting angles from general illumination to high angle moon-lighting to tight spotlighting. Using a heat resistant, clear tempered glass lens, the LED-LV308-SS316 submersible fixture is rated to a maximum of 50w of lighting, giving you a huge thermal overhead when using LED lamps (less heat = less heat damage = longer fixture lifetime). 21' of underwater cable comes pre-installed with the fixture as standard and is ready to be attached to your low voltage lighting systems right when you receive your product.

Material	Marine Grade 316 Stainless Steel
Voltage	12V
Socket Type	N/A - Terminal Leads + Adjustable Bracket Holder
Bulb Type	PAR36
Power Rating	50w Max
Wiring	252" of UL Listed 16/3 Underwater Cable
Mounting	Surface
Dimensions	6" X 6.5" X 6.5"
Certifications	ETL Approved for Underwater Applications

INSTALLATION PREPARATIONS AND PRECAUTIONS:
Please read this instruction sheet carefully.
Luminaires must be installed in accordance with the National Electric Code (NEC) and local codes. Failure to do so may result in serious injury and/or damage to the luminaire.

SAFETY WARNING: Luminaire can become very hot, depending on lamp wattage used. Lens and metal around the lamp can become hot enough to blister/burn hands. Particular care should be taken not to place luminaires where small children can reach them, especially when high wattage lamps are used.

IMPORTANT SAFETY INSTRUCTIONS
THE LIGHTED LAMP IS HOT!!!
To avoid electrical shock, turn off the power at the circuit breaker before starting your installation project.

WARNING: TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS:

• Turn off/unplug and allow fixture to cool before replacing lamp.
• Lamps get hot quickly! Contact only switch/plug when turned on.
• Do not touch hot lens, guard or enclosure
• Keep lamp away from material that may burn
• Do not touch the lamp directly at any time. Use a soft cloth. Oil from the skin may damage the lamp when illuminated.
• Do not operate luminaire fitting with a missing or damaged cover.

NOTE: Always use UL recognized wire connectors.

%%Panel.OutdoorAccessories%%