LED Low Voltage (12v) Heavy Duty Brass Underwater Pond Lighting - LEDUX003. Includes: FREE LED Bulb , 29 ½ foot long heavy duty cable, Rubber "Nautical" Water Seal Gasket. The AQLIGHTING raw brass landscape low voltage (12v) wide spot is designed with an open face to allow for full light distribution. Heavy cast brass construction to ultimate for outdoor use. Brass is the strongest longest lasting material to withstand the exterior elements . It's professional look enhances any residential or commercial areas, a perfect way to highlight plant life and architectural elements. Select the proper beam angle in our AQL energy efficient LED PAR 36 bulb to achieve the best illumination. Also available in LED PAR36 warm white or cool white. LED technology offers a large energy savings, using a fraction of the power that halogen does, and boosts the quality of your lighting. Applicable in either wet or dry locations, and with multiple mounting options. This bulb will still operate even if submerged underwater. This bulb also comes in many beam spreads allowing you to have a larger variety of light output and direction options for your garden, pond or park applications.

Bulbs

AQLIGHTING is using some of the newest, most efficient and reliable LED's available today for it's LED PAR36 bulbs with over 40,000 hours of life span rating vs less than 2,000 for halogen and a 3,100K color temperature.

Voltage

We designed the LEDUX003 brass underwater light kits to function on 12V. 12V systems require a low voltage transformer.

Included:

• 1 X 12V LED Cool or Warm 30w Equiv (6W) PAR36 Bulb
• 1 X LEDUX003 Fixture
• 1 X 29.5' Heavy Duty Cord
• 1 X 3.5" Round Case Brass Surface Mounting Base

Warranty

One year limited warranty against defects in construction.

• Solid Cast Brass Construction for the Longest Lasting and Highest Quality Fixture
• Brass "U" bracket allows you to direct fixture to your desired angle.
• Lifetime Guarantee not to Rust or Corrode
• WireGuard™ Bushing helps Protect Wires.
• "Wet Seal" Silicon Gasket.
• 29' 4" UL Listed SVT Cord.

Material	Cast Brass
Voltage	12V
Socket Type	N/A Terminal Leads
Bulb Type	PAR36
Power Rating	75w Max
Mounting	Ground or Surface
Fixture Weight	5.10 lbs.

Product Dimensions:

INSTALLATION PREPARATIONS AND PRECAUTIONS:
Please read this instruction sheet carefully.
Luminaires must be installed in accordance with the National Electric Code (NEC) and local codes. Failure to do so may result in serious injury and/or damage to the luminaire.

SAFETY WARNING: Luminaire can become very hot, depending on lamp wattage used. Lens and metal around the lamp can become hot enough to blister/burn hands. Particular care should be taken not to place luminaires where small children can reach them, especially when high wattage lamps are used.

IMPORTANT SAFETY INSTRUCTIONS
THE LIGHTED LAMP IS HOT!!!
To avoid electrical shock, turn off the power at the circuit breaker before starting your installation project.

WARNING: TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS:

• Turn off/unplug and allow fixture to cool before replacing lamp.
• Lamps get hot quickly! Contact only switch/plug when turned on.
• Do not touch hot lens, guard or enclosure
• Keep lamp away from amterial that may burn
• Do not touch the lamp directly at any time. Use a soft cloth. Oil from the skin may damage the lamp when illuminated.
• Do not operate luminaire fitting with a missing or damaged cover.

NOTE: Always use UL recognized wire connectors.

%%Panel.OutdoorAccessories%%