The AQLIGHTING high output 3 submersible fountain light bundle kit deal. The LARA60KIT underwater kit comes with several colored lenses for further submersible lighting options. Paired with the AQLIGHTING UL-approved 60w outdoor transformer, this underwater fountain kit comes with everything you need for submersible lighting.
WARNING: Please be aware that when using underwater fixtures, you must avoid using strong acid chemicals in that body of water as it will destroy the fixtures. For more detailed information, please click here.

High Quality Underwater Illumination

The LARA60KIT-BLK underwater kit uses 20 watts per fixture to create brilliant illumination, even from great depths. This submersible pond lighting is TWICE as bright as the standard underwater pond 3 light kits. We guarantee that this fixture will shine, even in the murkiest of waters. This quality lighting is made possible by utilizing the MR11 light bulb platform which allows for a more compact fixture, perfect for shallow fountains or discrete pond lighting. Each LARA60KIT fixture is designed with a directional swivel, giving you full control over the direction and angle of the light, providing custom lighting arrangements that meet your submersible requirements.

Colored Lens Included

This Underwater Kit also comes with four sets of colored lens that will snap onto the fixture's head. Customize your lighting project and add beauty to your pond or fountain with the LARA60KIT today!

Kit Includes

• 3 X Heavy Duty Underwater Composite Fixtures
• 3 X Halogen 20w MR11 Light Bulbs
• 3 X Colored Lenses
• 1 X UL Listed 60w Outdoor Transformer

Warranty

These light fixtures and transformer are warrantied for 12 months from the date of purchase. PROOF OF PURCHASE IS REQUIRED for claiming warranties. Bulbs are NOT covered under warranty. If your fixture(s) or transformer proves defective during this period, please call 1 (800) 865-7221 for assistance/replacement.

• High Output Halogen Lighting
• Heavy Gauge Underwater Grade ABS Plastic Construction
• LED Ready G4 JC Bi-Pin Socket
• Directional Swivel
• UL Listed 12 Volt 60 Watt Outdoor Transformer
• Water Tight Rubber Wet Seal Gasket
• Set of 4 Color Lenses Included

Product Dimensions

Installation Instructions:

When installing this underwater spotlight kit, please make sure that each fixture is sealed before submerging in water. Though each spotlight comes from the factory with the cover attached, we highly recommend removing the cover to ensure that the gasket is properly seated to keep water from entering.

• To check the seal, unscrew the cover of the fixture by gripping onto the octagon shaped bit and turning it counter-clockwise 1/4 of a rotation then gently pull.
• The red gasket must be seated inside the inner ridge of the spotlight to ensure that water cannot enter the fixture.
• Replace the plastic curved lens and octagon shaped cover. To test the fixture's water tightness, you can submerge the fixture in water for a short period of time (10-15 mins) and check for leaks by turning the fixture upside down and looking in the curved lens cover.

Product Notes:

With the halogen light bulbs on, condensation inside the fixture may occur but more than light condensation may be the result of a leaking gasket or cracked fixture body. For further assistance, please contact our support staff at 1 (800) 865-7221.
WARNING: the spotlights are submersible, the transformer is NOT!

Underwater Light Kit

The transformer for this underwater light kit is UL approved for safe operation.
CAUTION: Though these lights may be used either in or out of water, when used out of water, the fixtures may get hot. Be careful not to place them in contact with materials that can burn.

If located outside of water for extended periods of time, the lens cover might receive damage from the heat generated by the halogen bulbs.